Brower Timing Systems - USB Interface XS

The USB Interface XS is used to transfer data from the Timer, Wand, and Photocell to a computer. Data can be downloaded in three ways. The first is through a direct link transfer. This method will show the times on the computer as they are received from the Timer. The second method is to download the times from the Timer at the end of a race. The third method is to download the times stored on the Wand and Photocell(s). These times are reference times which are set when the system is synced. Matching up the starts, splits and finishes will give the total times for the racer. This is a built in back-up feature should any of the times be missed by the Timer.

Technical Information:

Power Source- No internal power source. Unit is powered by the PC or the XS Unit.

PC Compatibility- Windows XP Only

Weight- 4 oz.